Perimeter Protection Products
System Components:

Standard Base Plate
Corner Brace Unit
Beam Anchored Cable Support
Toe Board Attachment
Fall Arrestor
Concrete Base Plate
Re-Roofing Base Plate
SAFETY THAT SAVES YOU DOLLARS
• DECREASES PERIMETER EXPOSURE BY 87%
• OSHA COMPLIANT - SUPPORTS 200LB SIDE LOAD
• POSTS RE-USABLE ON FUTURE PROJECTS
• FAST INSTALLATION AND REMOVAL
• BASE PLATES REMAIN AS PERMANENT FALL
ARRESTOR SYSTEM FOR BUILDING
HOW IT WORKS:
Our system consists of a base plate and post. The base plate can be welded to the structural beams in the fabrication shop or in the field. The posts are then screwed into the base plates.  The posts support the wire cable at the perimeter of the building and can be easily removed and re-used on future buildings. The base plates become part of the building and at the roof level can be uncovered for future use as tie-off points with our fall arrestor accessory.
Post

IMPROVE SAFETY AND SAVE MONEY!
Our system eliminates 87% of the exposure at the edge of the building and saves a significant amount of labor during installation and even more during the removal. We have designed our system to be re-usable and to protect workers at the edge of the roof, lower floor perimeter, as well as, the stairwell and elevator shafts. It was designed to eliminate the currently used angle iron that is being welded into the roof and lower floor beams that later needs to be cut off, ground down and thrown out. Besides saving on labor costs for installation and removal, our posts can be re-used on building after building, saving you even more money.

Contact us at web@chbullco.com or call us at (800) 871-8440